Automationdirect.com DL05, User Manual

Page: 439 / 480

Appendix B Error Codes
B–4
DL05 Error Codes
DL05 Error Code Description
E433
INVALID SBR
ADDRESS
A SBR must be programmed after the end statement, not in the main body of
the program or in an interrupt routine. SP52 will be on and the error code will
be stored in V7755.
E434
INVALID RTC
ADDRESS
A RTC must be programmed after the end statement, not in the main body of
the program or in an interrupt routine. SP52 will be on and the error code will
be stored in V7755.
E435
INVALID RT
ADDRESS
A RT must be programmed after the end statement, not in the main body of
the program or in an interrupt routine. SP52 will be on and the error code will
be stored in V7755.
E436
INVALID INT
ADDRESS
An INT must be programmed after the end statement, not in the main body of
the program. SP52 will be on and the error code will be stored in V7755.
E437
INVALID IRTC
ADDRESS
An IRTC must be programmed after the end statement, not in the main body
of the program. SP52 will be on and the error code will be stored in V7755.
E438
INVALID IRT
ADDRESS
An IRT must be programmed after the end statement, not in the main body of
the program. SP52 will be on and the error code will be stored in V7755.
E440
INVALID DATA
ADDRESS
Either the DLBL instruction has been programmed in the main program area
(not after the END statement), or the DLBL instruction is on a rung containing
input contact(s).
E441
ACON/NCON
An ACON or NCON must be programmed after the end statement, not in the
main body of the program. SP52 will be on and the error code will be stored
in V7755.
E451
BAD MLS/MLR
MLS instructions must be numbered in ascending order from top to bottom.
E453
MISSING T/C
A timer or counter contact is being used where the associated timer or
counter does not exist.
E454
BAD TMRA
One of the contacts is missing from a TMRA instruction.
E455
BAD CNT
One of the contacts is missing from a CNT or UDC instruction.
E456
BAD SR
One of the contacts is missing from the SR instruction.