14
GDO-10V2 Toro
™
Owner Installation Instructions
ock Kit Installation Instructions
RED
BLACK
RED
BLACK
RED
BLACK
BLACK
V -
09
fi g
10
fi g
11
fi g
STRUCTIONS | OWNERS COPY
EasyBeam™ Installation
Step 5 - Photo Electric (PE) Beams
A photo electric EasyBeam™ extends across the garage
door opening. The EasyBeam™ is designed to detect
an obstruction while the door is closing and to send a
signal to the garage door opener to reverse or stop
the
door movement.
Step 5.1 - Fitting the EasyBeam™
Attach the mounting bracket (4) to the adjustment
bracket (3) with the pan head screw (6) (supplied).
(Fig. 09)
Attach the bracket (2) to the EasyBeam™
transmitter with four taptite screws (m3x5) and
attach the other side to the adjustment bracket (3)
with the pan head screw (6) .
(Fig. 10)
Repeat steps a and b to assemble the EasyBeam™
receiver.
Locate the Photo Electric (PE) Beams in a strategic
location in the doorway. Automatic Technology
recommend that the sensor is placed 100mm above the
fl oor level and as close as possible to the door opening.
Connect as per the wiring diagram
(Fig. 11)
.
Step 5.2 - Alignment
Power up the GDO10v2 with the EasyBeam™
connected. The green LED on the transmitter
should turn ON to indicate power is present.
If the receiver is connected to power and the
red LED is fl ashing while the green LED on the
transmitter is on, the transmitter and receiver are
not aligned.
Make horizontal and/or vertical adjustment on the
transmitter and/or receiver until the red LED on the
receiver turns on, indicating alignment.
NOTE: The height of the beam installation
must be chosen in such a manner that it suits
the application, the environmental conditions
and provides maximum safety protection.
WARNING: Install the PE Beams as per diagram
in (Fig. 03). Tampering with the PE Beams
could result in serious personal injury and/or
property damage and will void the warranty.
WARNING: PE beams must be installed if the
closing force as measured at the bottom edge
of the door exceeds 400N (40kg).
a.
b.
c.
a.
b.
c.
1
2
3
4
6
6
