Automatic Technology SECURALIFT, Installation Instructions And Owner'S Manual

Page: 17 / 19

DEFAULT STEP MAXIMUM
MAXIMUM MOTOR RUN TIME 30 Sec. _ _
COURTESY LIGHT TIME 3 Min. 10 Sec. 10 Min.
OBSTRUCTION FORCE MARGIN 4 1 16
AUTO CLOSE TIME 0 Sec 5 Sec. 4 Min.
FACTORY SET DEFAULTS
INPUT VOLTAGE: 230 V / 240 V AC 50 Hz
OPENER PUSHING / PULLING
FORCE 300 N
RECEIVER TYPE UHF 433.92 MHz AM Receiver
Receiver Code Capacity
27 X 4 Transmitter Codes
TRANSMITTER
Frequency
Coding Type
Number of Code Combinations
Code Generation
Battery Voltage 433.92 MHz
Hopping Code
Over 4.29 Billion Hopping Codes
Non-linear Encryption Algorithm
12 Volts
TECHNICAL SPECIFICATION
S
16
DOOR STATUS INDICATORS
.
DOOR OPENER STATE OPEN LED
GREEN
CLOSE
LED
RED
SERVICE
LED
YELLOW
COURTESY
LIGHT
BEEPER
OPEN On
CLOSE On
OPENING Flashing
CLOSING Flashing
DOOR TRAVEL STOPPED Flashing Flashing
DOOR OBSTRUCTED WHEN OPENING Flashing Beeps on and off
DOOR OBSTRUCTED WHEN
CLOSING Flashing Beeps on and off
DOOR OVERLOADED Flashes ten times Beeps on and off
DOOR AND OPENER REQUIRE A SER-
VICE Flashing Beeps at the start of any
cycle
DOOR AND OPENER APPROACHING
OVERLOAD Beeps for the duration
of the time approaching
overload
DOOR HAS APPROACHED OVERLOAD
THREE TIMES IN EIGHT CYCLES On Beeps at the start of any
cycle
DOOR IN OPEN POSITION WITH AUTO
CLOSE MODE SELECTED One second
flashes
MAINS POWER INTERRUPTED TO
OPENER Rapid flashes