13
TO MAKE FLIP TOP BOXES.
Enter dimensions as for other box styles but note the following:
The flip top flap is 75mm when the height is 60mm or less. When the height is over
60mm, the flap will be 125% of the height. Minimum length is 155mm.
The flip-top box is measured as shown.
SELF-DESIGN (12 SLOT) PROGRAM.
This program is used to make unusual boxes or fittings, or it can be used to make
standard boxes if all the dimensions are already known. Up to twelve dimensions can
be entered. The first dimension entered will be from the front edge of the board to the
centre of the first slot. Subsequent entries are from the centre of the previous slot to the
centre of the next slot.
Only one blank dimension is displayed and this is the total of the entries made plus the
glue flap. The machine does not calculate the blank width and setting – this must be
done manually.
Le
ngt
h
W
idth
He ig ht
