47
FITTED EQUIPMENT
09
SECTION
Fault
Possible Cause
Proposed Fix
No 12 volt output
from PSU
No 230v supply
Check all above
Charger not switched on
Switch charger switch on (I) position,
switch will illuminate
Battery not connected and
/ or charged
Install charged battery
Power switch on control
panel not switched to ON
Turn power on at control panel
Battery flat / Battery fuse
blown
Recharge battery, check fuses, check
charging voltage is present at
battery
Fuse blown
Check all fuses are intact and the cor-
rect value fuse is installed as
per fuse table
Equipment switched off /
unplugged
Check equipment is switched on and
connected to the 12v supply
PSU overheated / auto
shutdown operated
Reduce load on system. Allow PSU to
cool down. PSU will automatically restart
when cool.
Other fault
Contact your Dealer
Pump not working
Fuse blown
Turn pump on by pressing the pump
button at the EC328 control panel (tap
symbol)
Pump turned off
Fuse blown
Setting incorrect
Both the internal and external pump
feeds are controlled from the
EC328 control panel. To alter the setting
of the pump switch (tap
button) Ensure the setting matches your
desired requirement.
Summary of Contents for FORD TRANSIT CUSTOM AIR 2022
