Auto-Sleepers FORD TRANSIT CUSTOM AIR 2022, Owner'S Manual

Page: 3 / 80

3
INTRODUCTION
SECTION
01
Welcome
Congratulations on your purchase of an Auto-
Sleepers Campervan.
This handbook has been compiled to enable
you to obtain the maximum pleasure from your
vehicle. It contains the appliance instructions
along with advice on safety matters.
Please read this Handbook thoroughly so
that you are confident with all the campervan
systems, operating instructions and
precautions.
Failure to observe these recommendations
or precautions may result in incorrect
operation of equipment and subsequent risk to
occupants.
Information leaflets and literature on safe
operation of appliances and equipment fitted
to your campervan are included in the Auto-
Sleepers Customer Pack. Please read these
carefully prior to use.
Should you experience any difficulties contact
your dealer who will be pleased to offer advice.
To find your nearest Auto-Sleepers dealer
please go to www.auto-sleepers.com.
It is the policy of the base vehicle
manufacturer and Auto-Sleepers to
continually improve their vehicles, so whilst
the details contained within this Handbook
are correct at the time of going to press, they
reserve the right to alter the specifications at
any time without notice.
Auto-Sleeper campervans offer a variety
of customer uses and whilst each vehicle
features the optimum storage, fluid,
seating and sleeping capabilities, it is the
customer’s responsibility to select the proper
combinations of loads without exceeding
weight capacities.
Your Auto-Sleepers campervan conforms
to the European standard of EN 1646-1 for
habitation requirements relating the Health
and Safety.
Important
In the interests of safety, replacement
parts for appliances must conform to the
manufacturer’s specification and should be
fitted by them or an authorised agent.
Model
This Handbook covers the Auto-Sleepers
Custom Air campervan, based on the Ford
Transit Chassis.
Gas System
The gas system is designed to operate on LPG
stored in a re-fillable tank fitted underneath the
vehicle. The regulator has a working pressure
of 30 mbar.
Conversion Type
Auto-Sleepers take delivery of standard
complete unregistered base vehicle and
convert them into motorcaravans. They are
converted prior to registration.
Handbook
Any queries should be addressed to your Auto-
Sleepers dealer.
Appliance Instructions
The appliance instructions included have
been extracted from those supplied from the
appliance manufacturers.
Automotive
For all automotive matters you should refer
to the base vehicle instruction manual. This
includes tyre pressures. The Auto-Sleepers
conversion does not affect the tyre pressures
in any way because the completed vehicle
is built within the maximum capacities of the
base vehicle. The pressures are specified
by the base vehicle manufacturer for the
specified maximum axle masses.
The tyre pressures for Ford can be found on
a label located on the door pillar on the left
hand side of the body. Check the tyre size fitted
to your vehicle and read off the appropriate
information.