54
7
1
PM TEST
>CONNECT SMALL
CLIPS TO THE
ALTERNATOR
'Y' TO CONTINUE
>START ENGINE
AND THEN REV TO
GOVERNED SPEED
'N' TO CANCEL
11.
12.
10.
LOAD BATTERY
PLEASE WAIT
>ENTER NUMBER OF
BATTERIES: 4
USE +/-.
'Y' TO CONTINUE
3.
2.
>PM TEST
BATTERY TEST
BATTERY BANK
V DROP MENU
1.
AUTOMETER/REMY
INTELLI-CHECK2J
05/21/13
'Y' FOR MENU
>SET IDLE AT
ABOUT 1000 R.P.M.
'Y' TO CONTINUE
16.
#13 PM CHECK
BATTERIES: PASS
STARTING: PASS
CHARGING: PASS
18.
17.
TESTING ALT.
PLEASE WAIT
>ENTER SINGLE
CCA: 700
12.89 V
'Y' TO CONTINUE
8.
TESTING BANK
PLEASE WAIT
9.
>ENTER BATT TYPE
AGM USE +/-
12.89 V
'Y' TO CONTINUE
7.
>CONNECT LARGE
LEADS TO THE
BATTERY BANK
'Y' TO CONTINUE
4.
>ENTER BATTERY
TEMP: 40F
12.89 V
'Y' TO CONTINUE
6.
>BANK MUST BE
STABILIZED FOR
VALID RESULTS
'Y' TO CONTINUE
5.
13.
14.
15.
TESTING ALT.
AT GOVERNED SPEED
14.12 V
TESTING STARTER
PLEASE WAIT
TESTING ALT.
PLEASE WAIT
#13 PM TEST
GOOD BATTERIES
12.89 V CHRG 100%
19.
#13 PM TEST
CRANK V: 10.91 V
CRANK A: 570A
VDROP@500A: 0.41
20.
#13 PM TEST
GOOD REG: 14.09 V
RIPPLE: 2.70M V
21.
The PM Test should only be used
during a time when the vehicle
is in the shop for a PM Service,
NOT when the vehicle is having
electrical system issues. For a
vehicle with a suspected electrical
problem use the individual
tests starting with the batteries,
then the cables, and finally the
alternator or starter.
DOWNLOAD TEST INFORMATION
4.
PC Screen Menu
n
If the BCT-200J is properly connected to your PC and the LCD
shows “
CONNECT ANALYZER TO A PC
” the menu should
automatically be displayed in Hyper Terminal.
n
Press “1” to download the stored data.
To save the information displayed see “Capture text into
Microsoft Excel.” See BCT-200J test labels below for
identification.
n
Press “Enter” to return to Menu.
n
Press “Enter” to return to Menu.
n
Press “3” to Exit.
HyperTerminal
Windows
BCT-200J
Test Labels
Battery Bank
Beginning Volts
Loaded Volts
Rated CCA
# of Batteries
Temperature
N/A
Amb. Temp
12V Battery
Beginning Volts
Loaded Volts
Rated CCA
Est. CCA
Temperature
1ST CCA
Amb. Temp
24V Battery
Beginning Volts
N/A
N/A
N/A
Temperature
N/A
Amb. Temp
12V Alter.
Beginning Volts
Loaded Volts
mVAC
Peak Volts
mVAC
Rated Current
R-Term
24V Alter.
Beginning Volts
Loaded Volts
mVAC
Peak Volts
N/A
Rated Current
R-Term
12V Starter
Beginning Volts
Loaded Volts
Ext Volts
Pos Drop
Cranking Volts
Pos Drop
Draw
Small Red Clamp
Large Red Clamp
