40
21
DOES ALTERNATOR
HAVE A REMOTE SENSE?
'N' OR 'Y'
See photo of remote sense
alternator.
Select 'Y' for remote sense
REMOTE SENSE ALTERNATOR TEST (Cont.)
DOES VEHICLE HAVE
J-1708 DATA PORT?
'N' OR 'Y'
If vehicle is equipped with a J-1708
port and you have the optional
cable. Select 'Y'. If vehicle is not
equipped with J-1708 data port or
you don’t have an optional J-1708
cable select 'N' If NO skip the next
two steps.
CONNECT SMALL
CLIPS TO THE
REMOTE TERM/GND
'Y' TO CONTINUE
Use the small ext leads and connect
the red to the remote sense port and
the black to the Alt ground.
ERROR:
FAULTY REMOTE
SENSE WIRE
'Y' TO CONTINUE
If the tester does not see battery
voltage this error will appear.
Remote Sense
ALTERNATOR
STARTER TEST
REVIEW/PRINT
>BENCH TEST
The Bench Test is used to test the alternator that has been removed
from the vehicle and setup on an alternator test bench.
From the main menu select Bench
Test and press Y/Enter.
PRESS 'Y' TO
SCROLL THROUGH
BENCH SETUP OR
'+' TO SKIP
Press 'Y' to scroll through the
prompts for connecting the alternator
to the bench or press the +/Up key to
skip over the prompts to attach the
alternator and the test leads.
REMOVE THE
ALTERNATOR PULLEY
'Y' TO SCROLL
If the pulley that is on the alternator is a
different size or different style than the
pulley that comes with the bench, then
remove the pulley from the alternator
and attach the pulley that goes with the
bench to the alternator.
ATTACH BENCH
PULLEY TO THE
ALTERNATOR.
'Y' TO SCROLL
ATTACH THE
ALTERNATOR TO THE
BENCH.
'Y' TO SCROLL
Securely mount the alternator to the
bench following the instructions for the
bench.
ROUTE BELT OVER
LARGE BENCH
PULLEY.
'Y' TO SCROLL
It is important that the belt go around
the large pulley that is attached to the
bench motor. If the small pulley on the
bench motor is used or if a larger pulley
is used on the alternator then the bench
will not spin the alternator at full speed.
Utilize the proper size pulley that works
with the tester.
ALTERNATOR BENCH TESTING
10
