Auto Meter Remy BCT-200J, Instruction Manual

Page: 11 / 30

50 11
INDIVIDUAL BATTERY TEST (Cont.)
>ENTER BATTERY
TEMP. 70F.
12.39V
'Y' TO CONTINE
Make sure post
adapters are
screwed firmly
against the lead
pad.
>ENTER BATTERY
DATE CODE: A4
USE +/-. 01/04
'Y' TO CONTINUE
Use
Post Adapters
>ENTER RATED CCA
650
12.39V
'Y' TO BEGIN
TESTING BATTERY
PLEASE WAIT...
#220 12V BATTERY
GOOD NEEDS CHRG.
12.28 CHARGE 54%
EST CCA 840
>ENTER BATT TYPE
AGM USE +/-.
12.39V
'Y' TO CONTINE
The prompt only appears if the user
requests it in the SETUP. The first letter
should be flashing, this is the month.
Using the (+) or (-) adjust the month, then
press enter. the year will then flash use
the (+) or(-) to select the correct year.
'Y' to continue.
Using the (+) or (-) key adjust the
temperature in units of 10 degrees.
This should be the temperature of the
battery.
Using the (+) or (-) key adjust the CCA
of the battery. Press (Y Enter) to begin
test.
Use the (+) or (-) key to select the
battery type, either AGM or regular
lead-acid.
Wait for results.
There are five test results which are
explained in detail on Pg. 12
Make sure they are correct when done.
SETUP
From the main menu select
SETUP.
Select the temperature in
Fahrenheit or Centigrade.
If answered YES the above screen
will appear at the beginning of the
first test for a vehicle. Each digit,
with a total of 6, requires increment
or decrement to the desired
number. The requested digit to
change is flashing. By pressing (Y
Enter) the next digit is selected. On
the last enter the displayed number
will be accepted and remain in
memory.
You can require the entry of a vehicle
identification number for each test.
Use the (+) or (-) key to change the
displayed request.
To require technician numbers
change YES or NO using the (+) or (-)
key. Press (Y Enter) to select.
To require visual checks change
YES or No using the (+) or (-) key.
Press (Y Enter) to select.
Note: The ID number will not be
requested again as long as the unit
is not turned off.
To require battery date codes
change YES or No using the (+) or
(-) key. Press (Y Enter to select).
REVIEW/PRINT
VOLT METER
J1708 DATA
>SETUP
>SET TEMPERATURE
SCALE: F.
USE +/-.
'Y' TO SELECT
>REQUIRE VEHICLE
ID NUMBERS? YES
USE +/-.
'Y' TO SELECT
>ENTER VEHICLE
ID# 0000
USE +/-.
'Y' TO CONTINUE
>REQUIRE TECH.
NUMBERS? NO
USE +/-.
'Y' TO SELECT
>REQUIRE VISUAL
CHECKS? NO
USE +/-.
'Y' TO CONTINUE
>REQUIRE BATTERY
DATE CODES? NO
USE +/-.
'Y' TO SELECT