24
5
SAFETY
Carefully read all operating instructions before
using the BVA-200EX
Wear eye protection when working around
batteries.
Be sure each test is completed before removing
load clamps to prevent arcing and potential
explosion from battery gases. Never remove load
clamps while testing. Keep sparks flames, or
cigarettes away from batteries.
Keep hair, hands, and clothing as well as tester
leads and cords away from moving blades and belts.
Provide adequate ventilation to remove car exhaust.
In extremely cold temperatures, check for frozen
electrolytic fluid before applying load. Do not attempt
to Load Test or charge a battery under 20 degrees. Allow the battery to warm to room
temperature before testing or charging.
Warning!
Never attach the BVA-200EX to a battery that is connected to any other
tester or charging unit. Damage may result.
CAUSE OF BATTERY FAILURE
Incorrect Application:
Wrong size battery may have inadequate cold cranking rating
for original vehicle specifications.
Incorrect Installation:
Loose battery hold-downs cause excessive vibration, which
can result in damage to the plates.
Improper Maintenance:
Low electrolytic fluid and corrosion on battery connections
can greatly reduce battery life and affect battery performance.
Age of Battery:
If the date code on the battery indicates it is fairly old, the failure may
be caused by natural causes.
Overcharging:
Overcharging caused by a high voltage regulator setting or incorrect
battery charging can cause excessive gasing, heat and water loss.
Undercharging:
Undercharging caused by a faulty charging system or low voltage
regulation can cause lead sulfate to gradually build up and crystallize on the plates
greatly reducing the battery’s capacity and ability to be recharged.
Est. Output
DOWNLOAD TEST INFORMATION
3.
PC Screen Menu
If the BVA-200EX is properly connected to your PC and the
LCD shows "
CONNECT ANALYZER TO A PC
" the menu should
automatically be displayed in Hyper Terminal.
Press 1 to download the last 200 tests.
To save the information displayed see "Capture text into Microsoft
Excel." See BVA-200EX test labels below for identification.
Press Enter to return to Menu.
Press 2 to Exit.
HyperTerminal
Windows
BVA-200EX
Test Labels
From the BVA-200EX main menu select DOWNLOAD.
REVIEW/PRINT
VOLT METER
SETUP
>DOWNLOAD
CONNECT ANALYZER
TO A P.C.
9600, N, 8, 1.
‘N’ TO CANCEL.
