10
19
2
BATTERY TEST
5
OTHER MENU ITEMS
REVIEW TESTS
Press (Y Enter) to select
Review/Print.
The last test will be displayed.
Press (N Esc.) to select
previous test. Press (+Up)
or (-Down) key to select the
desired test.
An invisible infrared beam links the BVA-200EX to the optional
printer from up to 15 ft away. No connection cords are needed. For
more instructions on how to operate the printer
consult the printer manual.
Printer Type ------------------------------------ Thermal Printing
Paper ----- 2.25 in x 80 ft. (58 mm x 25m) roll (included)
Power ----------------------------------- AC adapter (included)
OPTIONAL INFRARED PRINTER
Scroll Down to Review/Print
Scroll down to about.
Press Y to select.
VOLT METER
SETUP
DOWNLOAD
>ABOUT
ABOUT SCREEN
The about screen shows the
model number. Firmware
revision and date.
Press any key to go back to
the menu.
BVA-200EX
VERSION 7.4
SER #: 17533
COPYRIGHT 2010
>REVIEW/PRINT
VOLT METER
SETUP
DOWNLOAD
#44 12V CHARGE
PASS REGULATOR
PASS DIODES
PASS OUTPUT
You can also select Battery Test from
the main menu and then press (Y
Enter).
Press the (+Up) or (-Down) key
to increment or decrement to the
rated CCA of the battery.
For ease of adjustment the last CCA rating will appear unless you have set
a default CCA rating in the SETUP menu. Press (Y Enter) to continue test.
Note: Enter the approximate battery
temperature in degrees Fahrenheit.
>ENTER RATED CCA
600 USE +/-.
12.50V
‘Y’ TO BEGIN
>ENTER BATTERY
TEMP 70F
USE +/-.
‘Y’ TO CONTINUE
>BATTERY TEST
STARTER TEST
ALTERNATOR TEST
REVIEW/PRINT
Press N to cancel once the clamps are
connect the test will proceed.
>CONNECT CLAMPS
TO BATTERY.
RED+, BLACK-
‘N’ TO CANCEL
If any of the tests (battery test, starter test, or alternator test) are selected
and the clamps are not connected to the battery the following screen will
appear.
