background image

2

27

LIMITED WARRANTY 

12 MONTHS FROM DATE OF PURCHASE

The manufacturer warrants to the consumer that this product will 

be free from defects in material or workmanship for a period of 

twelve (12) months from the date of original purchase.  

Products that fail within this 12 month warranty period will be 

repaired or replaced at the manufacturer's option to the consumer, 

when determined by the manufacturer that the product failed due 

to defects in material or workmanship. This warranty is limited 

to the repair or replacement of parts and the necessary labor 

by the manufacturer to effect the repair or replacement of the 

product. In no event shall the manufacturer be responsible for 

special, incidental or consequential damages or costs incurred 

due to the failure of this product.  

Improper use, accident, water damage, abuse, unauthorized 

repairs or alterations voids this warranty. The manufacturer 

disclaims any liability or consequential damages due to breach of 

any written or implied warranty on its test equipment.  

WARRANTY AND SERVICE INFORMATION

Warranty claims to the manufacturer's service department must 

be transportation prepaid and accompanied with dated proof of 

purchase. This warranty applies only to the original purchaser 

and is non-transferable. Shipper damage incurred during 

return shipments is not covered under this warranty. It is the 

responsibility of the shipper (the customer returning the Test 

Equipment) to package the tester properly to prevent any damage 

during return shipment. Repair costs for such damages will be 

charged back to shipper (customer returning the Test Equipment).  

Protect the product By shipping in original carton or add plenty 

of over-pack cushioning such as crumpled up newspaper.  

Summary of Contents for BVA-200EX















Reviews: