5) USB function select, click "procedure" => "USB Change" run USB function select,
user can choose 3 types of USB function, the user can choose according to need. if
using "U Drive function" mode, the user can "click" left small circle next to the
function, can finish selection successfully, "Software" and "USB Network Function"
option to select the same way. And when running "Software synchronizes" before the
user must install the appropriate synchronization software on your computer can run
the synchronization function.
6) Scan Head initialize and test scanner head
,
initialize the scan head, double click
to initialize the scan head automatically. After successful initialized scan test can be
proceeded
,
see if it works normally. Click to scan automatically or to scan manually.