Standby mode
If the terminal is not a long time, but when you need to shut down, you can press the
red button on the top left corner of the screen click the "power button", press to
release, when display change to black, then Handheld change to standby mode.
Recover
If you need to recover standby, you can short press the power button on top of the
screen's upper left corner of the "red" button, click that release, the screen will
Return
to standby mode
。
Hot boot
To assign the program, circuits, etc. back to the initial state of the process re-started
running, available on the keyboard "Direction key" lower right corner there is a
“
Small
Red button
”
to precede Hot boot
。
（
Remark: normally you may not need to use Reset (Reset) button, however, you
still have the occasional unexpected situations may occur: the case of a button or
screen operation no response (same to PC shut down situation). Then you must run
Reset (Reset), so that mobile intelligent terminal type to resume normal
operation
。）
Execute Soft Reset
Soft Reset will stop the operation of mobile intelligent terminal currently running,
restart the PDA, all records will be preserved and data stored in the mobile intelligent
terminal.
Execute method: using the front side of the stylus pressed Reset key.
Execute Hard Reset
Hard Reset (Hardware reset) makes mobile intelligent terminal forced to shut down
and remove all operations and is currently running in memory all data (when the
software is installed wrong or incorrect settings result in an error when the device
needs to perform).
Execute method: press and hold the power the keyboard and hold the stylus while
pressing the right front side of the Reset button.
Switch Off
If switch off needed
，
long pressing the upper left corner
“
Red
“
button, until black
display appear.
