Autel MaxiCheck MX808 User Manual Download

Page: 89 / 140

continue.

Click on

Install

and the printer driver program will be installed

onto

the computer.

Click on

Finish

to complete

the installation

procedure.



To delete selected images

Select

Data Manager

application from the MaxiCheck Job Menu.

Select

Image

to access the JPG database.

Tap the

Enter Edit

button to display the editing toolbar.

Select the images that need to be deleted by tapping the
thumbnail

images, the selected thumbnail displays a

check mark

at the bottom

right corner.

Tap the

Delete

button, and then

Delete Selected

he selected

images will be deleted.

PDF Files

The PDF section stores and displays all PDF files of saved data. After
entering the PDF database, select a PDF file to view the stored information.

This section uses the standard Adobe Reader application for file viewing
and editing, please refer to the associated Adobe Reader manual for

instructions.

Review Data

The Review Data section allows you to playback the recorded data frames of
live data streams.

On the Review Data main screen, select a record file to playback.

Summary of Contents for MaxiCheck MX808













































































































































Search results

Summary of Contents for MaxiCheck MX808

Reviews:

Related manuals for MaxiCheck MX808

Brands by name

Popular brands

Autel MaxiCheck MX808, User Manual

Search results

Summary of Contents for MaxiCheck MX808

Reviews:

Related manuals for MaxiCheck MX808

Brands by name

Popular brands