35
NOTE
This mode supports Graph Merge for 2 to 3
parameter items
.
To cancel Graph Merge mode, tap the drop-down button on the right side
of the parameter name, and select a data display mode.
Show
– tap this option to switch between the two options; one displays
the selected parameter items, the other displays all the available items.
Setting
– tap this button to open a setting screen, which allows you to
set the trigger mode, recording duration, and various threshold values
for data recording, and make other controls.
Figure 4-14
Sample Setting Mode in Live Data
There are four navigation buttons on top of the
Setting
mode screen.
Selected Button
– displays the configuration screen on which you
can
set the threshold values, an upper limit and a lower limit, for
triggering
the buzzer alarm
.
This function
only applie
s
to the
Waveform Graph
display mode.
a)
MIN
– tap to open a virtual keyboard, allowing you to enter the
required lower limit value.
b)
MAX
– tap to open a virtual keyboard, allowing you to enter the
required upper limit value.
