63
NOTE
The data you input should be in the
defined
range. If the input data is out
of
range, the tool will display a warning message “Permissible adjustment
range exceeded.”
[2] Reset Adjustment to 100%
Once the
[2]
is pressed, the tool will automatically reset the value to 100%.
[3]/[4] Store Data and Exit
When the injection volume adjustment is completed, select
[3]
and
OK
to
store the new value in the control units; or select
[4]
and
OK
to retain the old
value.
Injector Rate Adjustment
This function is used to adjust the injector rate for individual cylinders.
1.
Tap
Injection rate
adjustment
from the service functions menu.
2.
The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to enter the service function.
3.
Tap the corresponding number button to enter new value for each
cylinder.
4.
Follow the on-screen instructions to tap on the corresponding number
[1]
[2] [3] [4]
to enter the new value for the cylinder, restore the old value,
and exit after finish the function.
Particle Filter Regeneration
This function is used to perform the particle filter regeneration.
1.
Tap
Particle filter regeneration
from the service functions menu.
2.
The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to check the prerequisites
before particle filter regeneration, such as the fuel, the time and driving
style.
3.
If every prerequisite is met, the tool will ask
for
confirmation to proceed
as below. Tap
Request
to begin a regeneration or
End
to end the
service
function and exit.
