Installation and operation manual
IM-S2-UX-EN-V1.4
7
2.2
Package contents
Autarco UX series inverter
Mounting bracket
+ screws
12xMC4 connector
pairs
(S4.MC4F/MC4M)
Instruction manual
2.3
Internal DC switch
Please verify whether your Autarco UX series inverter is equipped with internal DC switches. This switch can be
found on the bottom of the inverter. If there isn’t an internal DC switch it is important to apply an external DC
disconnector in order to completely disconnect the solar PV module strings from the inverter.
2.4
Explanations of symbols on inverter
10min
DANGER - HIGH ELECTRIC VOLTAGE
This device is directly connected to public grid. All work to the inverter shall be
carried out by qualified personnel only. There might be residual currents in
inverter for up to 10 minutes because of large capacitors.
ATTENTION
This device is directly connected to electricity DC generators and the public AC
grid.
DANGER – HOT SURFACES
The components inside the inverter will get hot during operation, DO NOT touch
aluminum housing during operating.
ATTENTION
In case of any work to the inverter, always refer to this manual for detailed
product information.
ATTENTION
This device SHALL NOT be disposed of in residential waste. Please go to Chapter 9
“Recycling and Disposal” for proper treatments.
CE MARK
This equipment conforms to the basic requirements of the EU guideline governing
low voltage and electromagnetic compatibility.
