Auta hi-188, Manual

Page: 14 / 25

PLACA DIRECTORIO – DIGITAL PANEL DIRECTORY
13
Funcionamiento - Functioning
A d d : 1 E r a s e : 2
D i s p l a y / C h a n g e : 3
M a n u a l : 4 A u t o : 5
R x : 6 T x : 7
J
- - - - - - - 1 1 1 1 1 1
•
At this point, it is possible to change the Name with the arrows ( Å , Æ ), confirm with OK , or
change to another field of this register with . Let’s give an example of how it works: We are
going to fill the register with the following information: Name = Pedro, Flat Info = 1ºA, Call
Code = 222, m/t = 1, open.cod. = 0 (disabled) and nº of SDL = 2. From the screen above, the
steps to follow would be:
█ e d r o
- - - - - - - 1 1 1 1 1 1
P e d r o
█ - - - - - - 1 1 1 1 1 1
P e d r o
1 º A
█ - - - 1 1 1 1 1 1
P e d r o
1 º A - - - - 1 1 1 1 1
█
P e d r o
1 º A - - - - 0 0 0 2 2 2
m / t = █ S D L = 1
o p e n . c o d . = 0 0 0 0 0 0
m / t = 1 S D L = █
o p e n . c o d . = 0 0 0 0 0 0
m / t = 1 S D L = █
o p e n . c o d . = 0 0 0 0 0 0
Again using
Å
,
Æ
& OK enter
the text ‘1ºA’.
Use
Å
,
Æ
and OK to write
‘Pedro’. Pressing ‘ 1 ’ we can
change between capital and
small letters.
Press . We jump from the field
‘
Name
’ to the field ‘
Flat Info
’.
Use the keypad to enter 222.
The system will auto-fill with
zeros on the left ‘000222’.
Press . The system Changes
from the field ‘
Flat Info
’ to the
field ‘
Call Code’
.
Press . Changes from ‘
Call
Code
’ to ‘
m/t’
. This field is already
set to ‘ 1 ’. No changes needed.
Press OK or . Accepts the
code and give access to the
Directory Menu
options.
Add: 1
Press 1. More options in the
‘Add’ menu.
Press 4. Shows the default
pattern of a register.
Press . Changes from the
field ‘
m/t
’ to ‘
SDL
’.
Use the keypad to change the
value of SDL to 2.