12 | Settings
EN
Operating manual Fireplace inserts S3
68
12
Settings
12.1 Adjusting the door
1
Fig. 61:
Door frame bearing
1) The side doors can be adjusted by means of door
frame bearings (top + bottom)
1
2
Fig. 62:
adjusting the complete door
2) To set up the whole door, remove the two screws (1)
from the door strip cover.
3) Then loosen the three nuts (2) and set up the door.
1
2
Fig. 63:
Attaching the tuning weights
This adjustment should ideally carried out before the install-
ation of the fireplace insert.
The closing speed of the sliding door can be adjusted using
the tuning weights (2). It should not close too quickly (to
avoid breaking the door) but also not too slowly (so that the
door can close tightly). The tuning weights are added to the
main weight and can be removed.
4) Loosen the nut (1).
5) Add or remove the tuning weight (2).
6) Tighten the nut (1) again.
