9 PROG
10 PAGE
11 BUSY
Located at the right-hand end of the unit, these controls affect all zones.
12 ON
13 POWER
This control adjusts the overall level of all program sources into the zone.
This control adjusts the paging mic level into the zone.
This LED indicates that the control network is busy in this zone. The zone is currently being
paged or adjusted.
This LED indicates there is power to the unit.
This switches power from the power supply (included ).
NOTE:
When 24VDC emergency power is supplied, the unit is on regardless of
the switch position.
NOTE:
When 24VDC emergency power is supplied this LED will always be on.
6
NOTE:
To balance the differing levels of each program input, the program trim
controls on the rear panel should be used (see rear panel and setup
sections)
INSTALLATION SERIES
Australian Monitor
