1
ZONE select
2 CLEAR
3. ALL PAGE
4. ZONE PAGE
5. BUSY
These buttons allow selection of zones for paging.
When selected, the adjacent LED glows green.
Pressing the button again deselects the zone. The area
next to the button is for labelling the zone. Selecting a
zone does not instigate paging. See 4. ZONE PAGE.
This button clears all the selected zones.
This button pages to all zones. It is momentary so must
be held while talking into the microphone. It activates
the microphone and mutes the program sources. It
does NOT clear the current zone selection
configuration so the paging station will return to its
previous state (selected zones) once the ALL PAGE
button is released.
This button pages to the current zone selection
configuration as indicated by the ZONE select LEDs.
The zones being paged have their program sources
muted and the microphone becomes active. If no
zones are selected the system will still show as busy
when this button is pressed.
This LED glows when the network or system is busy. This
can be caused by the local paging station (you are
making a page), another paging station, or a remote
control panel being in use. Paging is not possible while
the system is busy, however zone selections can still be
made.
ZONE 8
ZONE 1
ZONE 9
ZONE 2
ZONE 10
ZONE 3
ZONE 11
ZONE 4
ZONE 12
CLEAR
BUSY
ZONE 5
ZONE 13
ZONE 6
ZONE 14
ALL PAGE
ZONE 7
ZONE 15
ZONE 16
ZONE PAGE
DigiPageM16
INSTALLATION SERIES
Australian Monitor
1
2
3
4
5
Controls
18
INSTALLATION SERIES
Australian Monitor
Introduction
The Australian Monitor Installation Series DigiPageM8 and DigiPageM16 Paging Stations are 8
and 16 zone paging stations complete with a slimline gooseneck paging microphone. The
Paging stations are designed to be used with the DigiPage Zone Paging & Source Selection
System and will allow paging into any individual zone, any combination of zones or All Call to
all zones. LED indicators provide the user with visual feedback of the zones being paged or if
the zone selected is busy. Ample label space is provided on the Paging Station, which also
provides a microphone gain control. Connection to the DigiPage is via low cost CAT 5 cable
and as with all Australian Monitor installation products, the Paging Station provides an elegant
solution at a contractor friendly price.
9. PAGING STATION
Base Plate
section
6
115.0mm
178.0mm
