All the controls correspond only to the zone for which the panel is programmed by the
installer. (see programming section)
1. Prog 1-6
2. Prog Off
3. Local On/Off
This row of 6 buttons selects the numbered program source. They are electrically interlocking
meaning that selecting one source will deselect the previously selected source.
This button will turn off the program source that is currently selected .
This button toggles the local input on or off.
Controls
6298
-A
1
2
3
4
5
6
1
2
5
3
4
RESET button
Holes for securing cable
Terminal block
for CAT5 wiring
20
INSTALLATION SERIES
Australian Monitor
Introduction
The Australian Monitor Installation Series DPRM Remote Control Panel is a control surface that
is designed to be used with the DigiPage Zone Paging and Source Selection System. The
DPRM allows control over program source selection, local input selection and volume
control from a remote location. LED illumination provides the user with visual feed back if the
system is busy. Connection to the DigiPage is via low cost CAT 5 cable and as with all
Australian Monitor Installation products, the Remote Control Panel provides an elegant
solution at a contractor friendly price.
10. REMOTE CONTROL PANEL
6
Data
(shown as terminated)
76.00
mm
116.00 mm
84.00 mm
mounting centers
96.00 mm
100.00 mm
51.00
mm
PROG
OFF
LOCAL
ON/OFF
BUSY
DOWN
UP
VOLUME
1
2
3
4
5
6
DPRMW