AussieCarHoists YL5000, User Manual

Page: 17 / 33

17 / 32
6.4
Risk of the Vehicle falling from the lift
Vehicle falling from the lift can be caused when the vehicle is improperly placed on platforms, and
when its dimensions are incompatible with the lift or by excessive movement of the vehicle.
In this case, keep immediately away from the working area.
6.5
Slipping Risk
The risk of slipping can be caused by oil or dirt on the floor near the lift.
Keep the area under and around the lift clean. Remove all oil spills.
6.6
Electrocution Risk
Avoid use of water, steam, and solvent, varnish jets in the lift area
where electric cables are placed and, in particular, next to the electric
panel.
6.7
Risk Resulting from improper lighting
Make sure all areas next to the lift are well and uniformly lit, according to local
regulations.
6.8
Risk of breaking component during operation
Materials and procedures, suitable for the designed parameters of the
lift, have been used by the manufacturer to build a safe and reliable
product. Operate the lift only for the use it has been designed for
and follow the maintenance schedule shown in the chapter
“Maintenance”.