AussieCarHoists YL5000, User Manual

Page: 7 / 33

7 / 32
Chapter 3 Packing, Transport and Storage
3.1 Packing
The packing of the lift is delivered in following components:
⚫
columns wrapped up in non-scratch material sealed with 2 straps, each 2 columns packed in one
package
⚫
runways each wrapped up in non-scratch material
⚫
transverse beams each wrapped in non-scratch material
⚫
jack wrapped up in non-scratch material
⚫
power unit and the control panel and other accessories packed in a plywood box
⚫
ramps wrapped in non-scratch material
(If customer has special request the packing will also be changed accordingly).
3.2 Lifting and Handling
When loading/unloading or transporting the equipment to the site, be sure to use suitable loading
(e.g. cranes, trucks) and hoisting means. Be sure also to hoist and transport the components
securely so that they cannot drop, taking into consideration the package’s size, weight and centre
of gravity and it’s fragile parts.
Hoist and handle only one package at a time
3.3 Storage and Stacking of the Package
Packages must be stored in a covered place, out of direct sunlight and in low humidity, at a
temperature between 10°C and +40°C. Stacking is not recommended: the package’s narrow base,
as well as its considerable weight and size make it difficult and hazardous.
3.4 Delivery and check of packages
When the lift is delivered, check for possible damages due to transport and storage; verify that what
is specified in the manufacturer’s confirmation of order is included. In case of damage in transit, the
customer must immediately inform the carrier of the problem.
Packages must be opened paying attention not to cause damage to people
(Keep a safe distance when opening straps) and parts of the lift (be careful the objects do not
drop from the package when opening).