AussieCarHoists YL5000, User Manual

Page: 8 / 33

8 / 32
Chapter 4 Product Description
Four Post Lift Rough Description
This four post lift has been designed for the lifting of motor-vehicles for wheel alignment
and normal maintenance.
The maximum lifting weight is as specified on the serial plate.
Most of mechanical parts such as runway, transverse beams have been built in steel plate to make
the lift stiff and strong while keeping a low weight.
The electro-hydraulic operation is described in details in chapter 8.
This chapter describes the lift’s principal elements, allowing the user to be familiar with the machine.
As shown in below picture, the lift is composed of below parts:
1) Column, 4pcs
2) Platform, 2pcs
3) Pneumatic-hydraulic jack, 1pcs, Optional 2pcs
4) Transverse beam, 2pcs
5) Rear slipping plates, 2pcs
6) Groove for the turntable, 2pcs
7) Control panel, 1pcs
8) Hydraulic power unit, 1pcs
9) Drive-on ramp, 2pcc