Battery Insertion
Insert 3 AAA batteries into the battery
compartment of the remote, paying attention
on direction of insertion, do not mix battery
types and use only new batteries
Setting the clock
As soon as the batteries are newly inserted the time can be set.
Using the keys the hour can be increased or decreased as required using the 24 hour time
format, Using the
O
key confirms the hour setting.
The minutes can be set using the same procedure, followed by the day of the week. Once the
O
key is selected to confirm the day the clock is confirmed as being set.
The remote then defaults to the “OFF” condition.
Adjusting the time
To change the time depress the buttons
O
and
together for 3 seconds until the word
“CLOCK” appears and the hour starts flashing.
Follow the instructions above to change the times as required.
Switching ON-OFF
By pressing the pushbutton
for at least 2 seconds, the fireplace and the handset are
switched ON-OFF. When the remote is switched OFF, the display shows the time, day, room
temperature and if enabled, “CRONO” symbol(Fig.5)
Remote Specifications
Supply Voltage
4.5 Volts (3 x AAA batteries)
Ambient temperature
0 to 50’C
Storage temperature
0 to 50’C
Humidity
<85%
Maximum Range
8 metres
REMOTE INSTRUCTIONS
33
Summary of Contents for Archer IS720G
Page 49: ...NOTES 49 48...
Page 50: ...NOTES 49...