Aurora Archer IS720G, Installation & Operating Instructions Manual, Page: 21 / 51

START UP CHECKLIST
!
WARNING
BEFORE OPERATING THIS APPLIANCE,
CAREFULLY READ THE FOLLOWING

Verify the gas line service does not exceed 2.5 kpa, 250mm and is not below 1.25kpa,
125mm for natural gas, nor exceeds 3.3kpa, 330mm or is below 2.75kpa, 275mm for
LP gas.

Check and inspect the appliance for gas leaks. In the event of gas leaks, cut off the gas
supply to the fireplace and contact your gas supplier immediately. Verify the gas line
has been purged

Verify that all exhaust and inlet air pipes are unobstructed and properly joined.

Visually verify the burner is free of dust and debris

Verify that all panels are secured in place and that the glass door assembly has been
locked in position

Verify that the polarity of the connections are correct and the line voltage power leads
are secure

After verifying and checking all the above points, process to lighting instructions.
Note: Verify the surround is installed per the instructions included with the kit.
20