Aurora Multimedia DIDO LT, Installation Manual, Page: 8 / 44

DIDO LT Installation Manual
7
IR Remote and basic key functions
The DIDO LT can be controlled using an IR remote control, via the front panel, or RS-232 commands.
The remote is addressable for installing with multiple DIDO LT units. To change the address on the
remote:
- Press and hold the ‘Up’ and ‘Down’ arrows together for 5 seconds. The red LED will start to
blink
- Enter the address (0-255) and press ‘Select’
In order for the IR remote to properly control a DIDO LT, both devices (IR remote and the DIDO LT)
have to have the same address. See System Setup Menu for more information on how to change the
DIDO LT’s address.