DIDO LT Installation Manual
28
Cloning
The DIDO LT can be cloned to save and restore all current parameters.
There are two steps involved in cloning procedure. They are:
1.
Learning
or downloading data (settings) from DIDO LT to the computer.
2.
Teaching
or uploading data (settings) from computer to the DIDO LT
Before cloning the DIDO LT, a folder which will be used to store data from the master DIDO LT
needs to be created (for example: C\DIDO LT\data). The clone utility (CloneLdr.exe) will be saved to that
directory.
Important:
DIDO LT may not be cloned properly if a USB to RS 232 adapter is used.
Command lines for learning and teaching:
Learning
:
CloneLdr.exe COM[Port#] /l File_Name.par
Teaching:
CloneLdr.exe COM[Port#] /s File_Name.par
CloneLdr.exe: clone utility.
COM[Port#]: serial port (such as 1 or 2) that is used for cloning.
/l: loading data from DIDO LT to the computer.
/s: sending data from computer to the DIDO LT
File_Name.par: name of the file that will be used to store data from DIDO LT
Summary of Contents for DIDO LT
Page 12: ...DIDO LT Installation Manual 11...
Page 43: ...DIDO LT Installation Manual 42...