DIDO LT Installation Manual
18
Horizontal Disabled
Horizontal Enabled
1.1.5 Output
Setup
Output timing for the DVI/RGBHV/YPbPr connector is selected here. Output type can also be modified
from this menu for the analog portion of the connector. The selections are RGBHV, RGsB, YPbPr, and
No Output.
HDCP Output
gives the ability to always have HDCP enable or the DIDO will decide when to enable and
disable the HDCP.
Video settings
adjust the brightness, contrast, saturation, and hue of picture output. All windows will be
affected when adjusted.
1.1.6 Preset
Setup
This menu allows the saving and loading of up to 99 presets. To save or load a preset, select Load Preset
or Save Preset. Then change preset number to be saved or loaded. Press “SEL” to confirm changes. If it is
saving, the OSD will display “Preset is being saved”. Presets can take up to 2 seconds to load. So if only
simple switching sources is needed, use the keys or RS-232 commands for quicker changing of inputs.
Presets are great for a starting point when many things need to change at once as it stores everything such
output resolution, modes, input setup, video settings etc.
Summary of Contents for DIDO LT
Page 12: ...DIDO LT Installation Manual 11...
Page 43: ...DIDO LT Installation Manual 42...
