Rev. 02/11
AMMF16R-1
8
IMPORTANT:
BEFORE STARTING:
Make sure the ball valve of the fan is placed in the OFF position (fig. 1).
Turn the mist control valve clockwise, until the valve is closed (fig. 2).
Connect the water hose connector to the garden hose (fig. 3).
Please keep the mist fan 12 feet away from your furniture and other electrical appliances (fig. 4).
Misting ON/OFF control
Mist ON
1. Press the rocker switch to the ON position (fig. 5).
2. Turn the ball valve to the ON position (fig. 6).
3. Open the flow control valve until mist is visible, then refer to
ADJUSTING MIST DENSITY
section, to
get an optimal mist performance (fig.7).
Mist OFF
1. Turn the ball valve to OFF position (fig.8).
2. To prevent the accumulation of mineral deposits, let the pump run for 2 minutes after closing the ball
valve so the air pump can clear the remaining water from the nozzles.
3. Turn the pump switch to the OFF position when complete (fig.9).
