background image

Rev. 02/11 

AMMF16R-1

 

 

When using this misting fan follow basic safety precautions including the following:

 

WARNING:

 

To reduce the risk of fire, electric shock, or injury:

 

1.    Make sure that the power source complies with the electrical requirements of the misting fan. 

2.    Do not use this misting fan with any solid state speed control device.         

3.    Do not expose to rain. Store indoors. 

4.    Do not use this misting fan with a damaged filter or without a filter installed. 

5.    To reduce the risk of personal injury, the misting fan should not be used as a toy or placed where         

children can reach it.   

6.    Close supervision is necessary when any appliance is used near children. 

7.    Use this misting fan only as described in this manual.    Any other use may cause electrical shock,     

fire, injury to people or animals. 

 

WARNING:

 DO NOT USE THE MISTING ON-OFF SWITCHES AS A MEANS OF 

DISCONNECTING  POWER  WHEN  INSTALLING  OR  SERVICING  THIS  PRODUCT.   
ALWAYS DISCONNECT THE POWER CORD. 

8.  Disconnect the power cord before moving or performing any maintenance on the misting fan. 

9.   This misting fan shall not be used in potentially dangerous conditions, such as flammable,   

explosive or chemically loaded atmospheres. 

10.  Do not use or store near hazardous materials. 

11.  Completely assemble the misting fan according to these instructions before connecting to the   

power source.   

12.  If the misting fan is not working correctly, has missing parts, has been dropped or damaged or 

dropped in water, call an authorized service center for evaluation, adjustment or repair. 

WARNING:

 

IMPROPER CONNECTION OF THE EQUIPMENT-GROUNDING 

CONDUCTOR CAN RESULT IN A RISK OF ELECTRICAL SHOCK.    CHECK WITH A 
QUALIFIED ELECTRICIAN OR SERVICE PERSON IF YOU ARE IN DOUBT AS TO 
WHETHER THE OUTLET IS PROPERLY GROUNDED.    DO NOT MODIFY THE PLUG 
PROVIDED WITH THE MISTING FAN IF IT WILL NOT FIT THE OUTLET; HAVE A 
PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. DO NOT USE A 
THREE-PRONG TO TWO-PRONG ADAPTER. IMPROPER CONNECTION MAY CREATE 
A RISK FOR ELECTRICAL SHOCK. 

 

13.    To protect against a risk of fire, electric shock, or injury to persons

  unplug or disconnect the 

appliance from the power supply before cleaning and user-maintenance, such as lubrication.

 

14.    Keep the cord away from heated surfaces. 

15.    To reduce the risk of injury from the misting fan accidentally starting, unplug the power cord   

before replacing the filter. 

16.    Do not leave the misting fan unattended when it is plugged in. Unplug it from the power outlet   

when not in use and before servicing. Turn off the misting fan before unplugging. 

17.    Do not operate the misting fan with a damaged power cord, plug, or if the misting fan is   

damaged in any manner.    Call an authorized service center for evaluation, adjustment or   

repair. 

18.    Do not run cord under carpets. Do not cover cord with throw rugs, runners, or similar   

Summary of Contents for AMMF16R-1














Reviews: