Aura Cebilon, User Manual, Page: 7 / 24

7
Functions of the Parts
Low Pressure Switch**, if the water is cut or if the pressure is lower than 0.2 bar
(3 psi), it prevents unnecessary operation of the pump.
5M Sediment Filter (350003Z), it retains the substances and particles floating
in water to make the water clear.
Pressure Pump** , brings the pressure of the water from the pre-filtration
to the level required for the operation of the membrane.
Carbon Filter (350002Z), retains free chlorine, organic substances and
unpleasant odors.
1M Sediment Filter / Carbon Filter (350004Z), it retains the substances and
particles floating in water to make the water clear.
Automatic Shut-off Valve*** controls the flow of water. If the system continues to run
after the tank is full, the water is wasted as a waste. This is an undesirable condition.
Water should be cut when tank capacity is reached. Automatic shut-off valve cuts
the water when the tank pressure reaches a certain level of the membrane inlet pressure.
Figure 3. Membrane structure
6
4
3
2
5
1
2
1
Membrane Filter
Reel
Adhesive Portion
of Membrane Filter
Mains Water Inlet
Membrane Container
Membrane Filter Reel Hole Ø2,5
Waste Water Outlet
Clean Water Outlet
1 - Internal Net Winding
2 - Middle Net
3 - Membrane Film
5 - Last Coating Film
6 - Adhesive Portion of 3 and 4
4 - Internal Net
* Applicable for 101 ME model.
** Applicable for 101 ME and 101 MD models.
*** Applicable for 101 MD and 101 FG models.