
1.
Safety instructions
1.1.
General notes on safety
4
Multi-turn actuator SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1 Non-Intrusive
with actuator controls AUMATIC ACExC 01.1 Profibus DP
Operation instructions
Standards/directives
AUMA products are designed and manufactured in compliance with recog-
nised standards and directives. This is certified in a declaration of incorpora-
tion and a declaration of conformity.
The end user or the contractor must ensure that all requirements with
respect to assembly, electrical connection, and commissioning at the place
of installation are met. They include among others:
.
Standards and directives such as: EN 60079 “Electrical apparatus for
explosive gas atmospheres"
Part 14: Electrical installations in hazardous areas (other than mines).
Part 17: Inspection and maintenance of electrical installations in hazard-
ous areas (other than mines).
.
Applicable configuration directives for fieldbus applications.
.
National regulations, laws, and prescriptions.
Safety instructions/
warnings
All personnel working with this device must be familiar with the safety and
warning instructions in this manual and observe the instructions given.
Safety instructions and warning signs on the device must be observed to
avoid personal injury or property damage.
Qualification of staff
Assembly, electrical connection, commissioning, operation, and maintenance
must be carried out exclusively by suitably qualified personnel authorised by the
end user or contractor of the plant.
Prior to working on this product, the staff must have thoroughly read and under-
stood these instructions and, furthermore, know and observe officially recog-
nised rules regarding occupational health and safety.
Work performed in potentially explosive atmospheres is subject to special regu-
lations which have be observed. The end user or contractor of the plant are
responsible for respect and control of these regulations, standards, and laws.
Commissioning
Prior to commissioning, it is important to check that all settings are in com-
pliance with the requirements of the application. Incorrect settings might
present a danger to the application, e.g. cause damage to the valve or the
installation.
The manufacturer will not be held liable for any consequential damage. Such
risk lies entirely with the user.
Operation
Prerequisites for safe and smooth operation:
.
Correct transport, proper storage, mounting and installation, as well as
careful commissioning.
.
Only operate the device if it is in perfect condition while observing these
instructions.
.
Immediately notify any faults and damage and allow for corrective mea-
sures.
.
Observe recognised rules for occupational health and safety.
.
Observe the national regulations.
.
During operation, the housing warms up and surface temperatures > 60 °C
may occur. To prevent possible burns, we recommend to the check surface
temperature with an appropriate thermometer prior to working with the device.
Protective measures
The end user or the contractor are responsible for implementing required
protective measures on site, such as enclosures, barriers, or personal
safety equipment for the staff.
Maintenance
To ensure safe device operation, the maintenance instructions included in
this manual must be observed.
Any device modification requires the consent of the manufacturer.