29
connection status icon on the MAIN screen is lit blue.
Pairing with a new Receiver/Transponder
Follow the below instructions to manually set up the pairing of a new
Receiver/Transponder. (
Guardian Angel® Rx
and
Guardian Angel® Rx Lite
)
Step 1:
Ensure the designated Receiver/Transponder is turned on. Wait until the Wi-
Fi Link LED lights red.
Step 2:
In the Setting menu, select “PAIRING"
→
“RECEIVER/TRANSPONDER”.
Step 3:
Scan the QR Code or key in the pairing code located on the
Receiver/Transponder.
Step 4:
Press “CONFIRM” if the pairing code displayed matches with the one on the
Receiver/Transponder.
Step 5:
Follow the onscreen instructions to setup the Wi-Fi connection of the
Receiver/Transponder.
(a)
Press and hold the Power button of Receiver/Transponder for 10
seconds until “RESET” is heard. Wait for 1 minute until the
Receiver/Transponder plays a melody to proceed to the next step.
(b)
Select the desired Wi-Fi network from the list of available
connections displayed on the Display Unit/Aulisa mobile application
(for Android user), or key in the network name (for iOS user). Enter
the network security password and press “CONFIRM”.
NOTE:
The Aulisa sensor module(s) remains paired with the system until the serial
number is deleted from the list.
NOTE:
Only one (1) Receiver/Transponder can be stored on the Display Unit/Aulisa
mobile application at a time.
NOTE:
The alarm event history is managed via the Receiver/Transponder, so you won’t
be able to see the current alarm event history when the Display Unit/Aulisa mobile
application is paired to a new Receiver/Transponder.
NOTE:
The power LED on the Receiver/Transponder lights green when the power is ON.
