AUKS AFC-1000CF/4, Technical Manual

Page: 35 / 60

AUKS Light CAC R22 60Hz T3 Controller
35
2 Remote controller
2.1 Basic condition of remote controller
Name Figure Basic condition for operation
Remote
controller
1.Power source
Use 2 pcs No 7 batteries,working voltage:2.0V-5.0V;
2. Signal frequency:infrared frequency 38kHz;
3. Remote distance:max working distance is7m.
Key operation introduction:
Temperature setting range 16
℃ -32 ℃ ;
2.2 Function
Remote conntroller: K series
POWER button : Switch the unit ON/OFF.
MODE button : Select mode , push the button one time, then the operation modes will change in turn as
Auto-Cooling-Dehumidify-Heating
TEMP + button and TEMP - button : Temperature adjustment range: 16~32
FAN button : Change the fan speed will change in turn as: Low-Medium-High-Auto
SWING button 1 : Press this button for the first time when operation, it will start the up and down swing
function. Push the button for the second time, cancel the swing function.
SWING button 2 : Press this button for the first time when operation, it will start the right and left swing
function. Push the button for the second time, cancel the swing function.
Feeing button: Press this button for setting the feeling function.The LCD shows the actual room
temperature when the function set and it shows the setting temperature when the function cancelled.The
function is invalid when the appliance at the fan mode.