Installation
48
COMpact 4000 - Instructions V05 10/2018
Requirements:
• Enabled operating mode “U
P0
internal“ at the U
P0
port in question
• Enabled terminators in the PBX at the internal U
P0
port in question
If the terminals and the PBX have a short distance
to each other, connect a single COMfortel 1200/
1400/1600/2600 system telephone directly to the
RJ-45 socket of the internal U
P0
port. For all other
ISDN terminals or two system telephones per port
you require a U
P0
/S
0
Adapter.
If the distance between PBX and terminal is greater,
lay the lines fixed at the terminal clamps of the
internal U
P0
port.
Caution:
Terminals integrated in the wall sockets are destroyed and can damage
the device.
• Contrary to the S
0
port, do not equip a line at the U
P0
port with terminals. These are
already integrated in the terminals (COMfortel 1200/1400/1600/2600 or U
P0
/S
0
Adapter.
• Remove terminals which have already been integrated in the wall sockets for use at the
U
P0
port.
Note:
You do not need an ISDN wall socket if you use a U
P0
/S
0
Adapter. The U
P0
/S
0
Adapter can be mounted on the wall or it can be connected to the PBX via the two screw
terminals on the back.
operating mode “U
P0
internal“
terminators enabled
internal U
P0
port
IAE/UAE8
Summary of Contents for COMpact 4000
