
First Setup
40
COMpact 4000 - Instructions V05 10/2018
Turning on the PBX
Warning:
Touching voltage-carrying conductors or telephone connections can
cause life-threatening electric shocks.
• Close the casing before you put the PBX into operation.
Requirements:
• PBX connected to earthing and casing closed
Connect the PBX to a freely accessible Schuko socket.
The
Power
and
Status
LEDs light up several seconds/minutes
in red and orange.
When the LEDs light up in green, the PBX is ready for operation.
Note:
If the
Power
LED remains continuously lit in red, an error has occurred. Please
contact your dealer or the manufacturer directly.
First Setup
Warning:
Incomplete or incorrect configuration can be hazardous to people, if for
example emergency calls cannot be performed.
• The configuration of the product is made via an integrated web server whose pages are
called via web browser. The user interface of the web server (Configuration Manager) is
available in English and German. If you are not familiar with these languages and the
technical terms, please consult a specialist who is linguistically and professionally
qualified.
Information about the Network Connection
Configuring the PBX using a PC is done using the configuration manager integrated in the
PBX. This can be accessed via the IP address of the PBX. The IP address to be used
depends on your connection and network environment.
• If the PBX is not connected to a router but is connected directly to a single PC which
receives its IP address automatically (default setting on Windows and Mac OS X), you can
access the PBX via the permanent IP address 169.254.1.240 from the APIPA address
range.
• If the PBX is connected to a router that works as a DHCP server and allocates IP
addresses to the devices connected (default setting on most routers), you can access the
PBX via two IP addresses:
1. Via the permanent IP address 169.254.1.240 from the APIPA address range.
2. Via the IP address allocated by the DHCP server.
Summary of Contents for COMpact 4000
