227
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
Functions
Automatic Bandwidth Amplification
Function Key for Automatic Bandwidth Amplification
Press the key to switch the automatic bandwidth amplification function on or
off or to toggle.
In addition, when functions are assigned on the first key level, the status of
the function is indicated by the corresponding LED.
Proceed as follows by assigning the function key:
•
Using the Configuration Manager by selecting
Automatic bandwith
amplification
•
Using the telephone by selecting
Automatic bandwith amplification
Notes:
The function can only be set up on a programmable function key that has
an LED (not on a touch function key).
For further information about the general procedures when assigning
function keys, see
LED signalling on the key:
green
Automatic bandwidth amplification is switched on.
Off
Automatic bandwidth amplification is switched off.