Audison bit One HD Virtuoso User Manual Download

Page: 80 / 90

USER'S MANUAL

The semi-automatic procedure continues

requesting the set up of the high volume

listening reference level. Move the Volume

slider to the desired level.

After adjusting the slider, select

START

Move the

slider to set up the high volume

response equalization until the desired

sound is achieved. After finding the right

adjustment select

SAVE

At this point the reference curve for high

volume listening will be applied.

Reset Dynamic EQ

During the setup the Reset EQ button

can be selected to reset the applied

modifications and restore the default

values.

To confirm the settings and activate the

Dynamic Equalizer while listening click on

the X of the PC software window.

At a later stage, besides being enabled and disabled via PC software, this function can also be enabled/disabled

via DRC MP.

ADVANCED MODE

The equalization curve, in this mode, is not

fixed. It must be selected through a parametric

equalizer. The procedure for the setup is the

same as the one previously explained for the

EASY mode with the further possibility to

apply a customized equalization. The image

to the side displays the main window showing

a “customized” equalization.

Reset Dynamic EQ

During the setup the Reset EQ button can be

selected to reset the applied modifications

and restore the default values.

To confirm the settings and activate the

Dynamic Equalizer while listening click

on the X of the PC software window

At a later stage, besides being enabled and

disabled via PC software, this function can

also be enabled/disabled via DRC MP.

Summary of Contents for bit One HD Virtuoso



























































































Search results

Summary of Contents for bit One HD Virtuoso

Reviews:

Related manuals for bit One HD Virtuoso

Brands by name

Popular brands

Audison bit One HD Virtuoso, User Manual

Search results

Summary of Contents for bit One HD Virtuoso

Reviews:

Related manuals for bit One HD Virtuoso

Brands by name

Popular brands