43
USER'S MANUAL
If you choose to activate the Optical 1 input as the Master input of your source, and this does not have an output
volume control, this operation is essential to be able to adjust the volume from your audio source. For connections,
refer to
of this manual and proceed as follows.
7.2.4
MASTER INPUT OPTICAL 1
1.
Auto Input Switch
The automatic volume control for the
auxiliary source (Aux - Optical 1/2) can be
activated through the Head Unit volume
control, if it is provided with an AUX input
(see section 5.4.3, 5.6.1; 8.3.5 ).
If the car HEAD
UNIT does not have an AUX analog input,
connect a USB memory (or SD Card) to
the USB reader of your audio source as
shown to the side. The USB/SD device
must contain the mp3 format file available
in the RVA TONE folder located inside
the Setup CD (these files can also be
downloaded from the Audison website).
Please note that the storage device must
only contain this file and no other files. If
you use the USB memory to activate the switching via the RVA function, simply select the USB (SD)
or Master input.
-
Press
BACK
to go back to the previous step.
-
Press
NEXT
continue with the calibration.
-
Press
SKIP
to bypass the procedure.
Follow the instructions listed below:
-
connect the
AUX IN
inputs of the
source (Head Unit) to the bit One HD
Virtuoso
RVA
input.
-
select the source
AUX IN
input
(Head Unit).
-
set the source volume to the
maximum undistorted level.
At the end of the procedure:
-
Press
BACK
to go back to the
previous step.
-
Press
NEXT
to continue with
the configuration.
-
Press
CANCEL
to exit.
7
