manualshive.com logo in svg

Audison bit One HD Virtuoso, User Manual

Share
Download
Audison bit One HD Virtuoso User Manual Download Page 30

30

USER'S MANUAL

At the end of the procedure the results of the analysis of the fronts of the interfaced source will be 

shown. By selecting Module the frequency trend of the signal will be displayed (Master EQ), the curve 

calculated to compensate for the present equalization (Master De-Eq), the trend of the sum (SUM), in 

addition the software will calculate the trend of any input filters (XOVER) available. Clicking on each 

individual chart on the front, it will be possible to enlarge the trend of each individual front. It is also 

possible to display in this window the presence of time delays on the source if analysed, if any.

By selecting PHASE, instead, the phase compensation of the fronts suggested by the software will 

be displayed. It is applied via All-Pass first and second order filters according to the OEM source 

algorithm. In addition the software will display the electric response provided by the fronts selection, 

to inform the user about the suggested compensation. It will be possible after the end of the "I / O 

Configuration Wizard" to optimize the positioning of these filters or enable them 

(see sect. 8.8.1)

-

 Press 

BACK

 to go back to the previous step.

-

 Press 

NEXT

 to continue with the configuration. 

-

 Press 

CANCEL

 to exit.

7.

 INPUT Analysis Dashboard.

7

Summary of Contents for bit One HD Virtuoso



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands