22
USER'S MANUAL
PC software turn on in CONNECT MODE:
Upon turn on, if correctly interfaced with the
PC (software and drivers installed correctly),
the device will show the communication
window as shown in the figures to the side.
In the default configuration, the bit One HD Virtuoso is configured as shown below:
Input Hi Level Master:
-
CH1 Front Left Full
-
CH2 Front Right Full
-
CH3 Rear Left Full
-
CH4 Rear Right Full
AUTO TURN ON Hi Level:
enabled
Output Analog (Pre Out):
-
CH1: Front Left Woofer -CH2: Front Right Woofer
-
CH3: Front Left Midrange -CH4: Front Right Midrange
-
CH5: Front Left Tweeter -CH6: Front Right Tweeter
-
CH7: Rear Left Woofer -CH8: Rear Right Woofer.
If at the end of the scanning the bit One HD Virtuoso is not found:
-
check that the bit One HD Virtuoso is switched on (Audison logo
light on);
-
check that the USB cable is connected correctly;
-
press
OK
to search for the device again;
-
press
CANCEL
to start the OFFLINE mode.
7
