Audiovox NVX225 User Manual Download | Manualshive

Page: 69 / 91

background image

69

Note: Excluding a route is a preference. It does not necessarily mean total
prohibition. If your destination can only be accessed using some of the excluded road
types, The NVX225 Navigator will use them but only as much as necessary. In this
case a warning icon will be shown on the Route Information screen (4.6), and the
road not matching your preference will be displayed in red (yellow at night) on the
map.

5.4.4.1 Unpaved

Roads

Unpaved roads are excluded by default, as they can be in a bad condition and you
usually cannot reach the speed limit on them.

5.4.4.2 Motorways

When driving a slow car or towing another vehicle, you may prefer not to take
motorways. In this case change the default green to red.

5.4.4.3 Ferries

The accessibility of temporary ferries is not necessarily included in the map data.
Furthermore you may need to pay fare, so you may consider disabling them from the
preset enabled status.

5.4.4.4 U-turns

Although displayed amongst road types, this is a type of action. Most drivers prefer to
replace them with a few normal left and/or right turns in the next few junctions, so it is
disabled by default.

Turning back on dual carriageways is not considered as a u-turn.

Note: If you are not totally against u-turns, leave them on here, and add a certain
penalty (equivalent extra distance to travel) in Advanced settings Route options
(5.6.4.2).

Note: Via points are handled as stopovers with regards to u-turns. It means disabling
u-turns on this page will avoid u-turns during the entire route if possible, but when
reaching a via point, the following part of the route may be planned starting in the
opposite direction.

«
...
67
68
69
70
71
...
»

Summary of Contents for NVX225




























































































Reviews:

No comments

Related manuals for NVX225

Brand: Gator Pages: 11

Brand: Gator Pages: 15

Brand: Racelogic Pages: 2

Brand: Raven Pages: 28

Brand: Ravencourt Pages: 10

Brand: Teltonika Pages: 25

Interphone GPS Bike

Brand: Cellularline Pages: 2

Brand: OXTS Pages: 16

Brand: Globalsat Pages: 16

Brand: Holux Pages: 25

Brand: Holux Pages: 4

Brand: Holux Pages: 22

Brand: Garmin Pages: 2

Brand: XAiOX Pages: 13

Brand: Raymarine Pages: 24

Brand: NorthStar Pages: 80

Brand: TAG Pages: 8

Brand: GMR Pages: 140

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands