Audiovox NVX225 User Manual Download | Manualshive

Page: 61 / 91

background image

61

5.1.2 Set Favorite Destinations

You can select two of your most frequent destinations to be your favorites (6.3.5).
You can start navigating to either of them by only two taps on the screen. The
original names of these points are Home and Work.

You can rename them and specify their locations. To determine the location you can
use the same Find menu options (6.3) as for a route destination, and depending on
that choice and the information available, the location will be shown here as a street
address, a latitude/longitude position, or both.

Note: If you tap either of your favorite destinations in the Find menu (6.3.5) before
defining it, The NVX225 Navigator will offer to take you to this screen to set it up.

5.1.3 Automatic Night Colors

Using the automatic night mode, The NVX225 Navigator will change between the
daylight and night color schemes a few minutes before sunrise and a few minutes
after sunset based on the time and location information provided by your GPS. Once
you set a permanent color scheme in the Quick menu (4.7.2.3), this automatic mode
turns off. If you need The NVX225 Navigator to switch between colors for you again,
you need to re-enable this feature.

5.1.4 Warn When Speeding

Maps may contain information about the speed limits of the road segments. The
NVX225 Navigator is able to warn you if you exceed the current limit. This
information may not be available for your region (ask your local dealer) or may not be

«
...
59
60
61
62
63
...
»

Summary of Contents for NVX225




























































































Reviews:

No comments

Related manuals for NVX225

Brand: Garmin Pages: 2

Brand: Garmin Pages: 2

Brand: Garmin Pages: 35

Brand: Garmin Pages: 40

Brand: Garmin Pages: 90

Brand: Garmin Pages: 200

Brand: Garmin Pages: 58

Brand: Garmin Pages: 22

Brand: Garmin Pages: 16

GPSMAP 7400 Series

Brand: Garmin Pages: 52

Brand: Garmin Pages: 2

GPSMAP 700 Series

Brand: Garmin Pages: 66

GPSMAP 162 Sounder

Brand: Garmin Pages: 2

Brand: Garmin Pages: 104

Brand: Garmin Pages: 86

Brand: Garmin Pages: 88

Brand: Garmin Pages: 2

Brand: I-Trac Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands