Audiovox NVX225 Page 8 User Manual Download | Manualshive

Page: 8 / 91

background image

8

1

Warnings and safety information

The NVX225 Navigator is a navigation system that helps you find your way to your
selected destination. It will determine your exact location with the help of an attached
GPS device. The position information obtained from the GPS receiver will not be
transmitted anywhere, so others will not be able to track you.

If you are the driver of the vehicle, we recommend that you operate The NVX225
Navigator before beginning your journey. The driver’s attention should be on the
road. Plan your route before departure and pull over if you need to change route
parameters. The NVX225 Navigator has a built-in (optional) Safety Mode that will
prevent you from using the screen functions if your car is in motion. Unless a
passenger will be the only one to operate The NVX225 Navigator, we strongly
encourage you to turn on the Safety Mode.

It is also important that you look at the display only if it is absolutely safe to do so.

You should always observe traffic signs and road geometry before you obey any
instruction from The NVX225 Navigator. If you need to deviate from the
recommended direction, The NVX225 Navigator will suggest a modified route
according to the new situation.

Never place the NVX225 where it can obstruct the view of the driver, is within the
deployment zone of airbags, or where it can cause injuries in case of an accident.

«
...
6
7
8
9
10
...
»

Summary of Contents for NVX225




























































































Reviews:

No comments

Related manuals for NVX225

Brand: Raymarine Pages: 54

Brand: Raymarine Pages: 54

Brand: Yepzon Pages: 2

G1000:Beechcraft Baron 58/G58

Brand: Garmin Pages: 538

Brand: Garmin Pages: 68

Brand: Navman Pages: 88

RoadMate 9200-LM

Brand: Magellan Pages: 45

PathFinder P 3106

Brand: Pentagram Pages: 24

GPS 65 Personal Navigator

Brand: Garmin Pages: 76

TS-A1072R - Car Speaker - 20 Watt

Brand: Pioneer Pages: 5

Brand: Pioneer Pages: 8

AVIC-W8500NEX/XNUC

Brand: Pioneer Pages: 8

Brand: Pioneer Pages: 18

Brand: Pioneer Pages: 16

Premier AVIC-F90BT

Brand: Pioneer Pages: 57

Brand: Pioneer Pages: 190

AVIC-W8400NEX/XNUC

Brand: Pioneer Pages: 240

Premier AVIC-F90BT

Brand: Pioneer Pages: 192

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands