Audiovox NVX225 User Manual Download | Manualshive

Page: 67 / 91

background image

67

5.3.5 Attention Tone

If this is set to Disabled, the voice guidance will sound without a preceding attention
tone. Setting it to Single Tone will initiate a single attention tone before the
instructions, while Double Tone will use a double tone.

Note: The Mute function (4.5.11) accessible from the map screens overrides the
settings on this screen. When The NVX225 Navigator is muted, all sounds disappear.
These settings will not be changed; only the output will be muted temporarily.

5.4 Route parameter settings

This is a very important page. Settings here determine how routes will be calculated.
This screen is directly accessible from the Route Information screen (4.6).

5.4.1 Method

Use the handle to set the speed of the route calculation. In the leftmost position the
route may not be optimal but the calculation will be very fast. Sliding it to the right will
result in more accurate routing in an increased amount of time.

Note: Since The NVX225 Navigator calculates routes very quickly; the position of this
slide is only used for long routes. Short routes are always calculated to give you the
optimal result independent of the slider.

«
...
65
66
67
68
69
...
»

Summary of Contents for NVX225




























































































Reviews:

No comments

Related manuals for NVX225

Brand: Garmin Pages: 22

SporTrak SporTrak Color

Brand: Magellan Pages: 48

Brand: Sensitech Pages: 2

Brand: Pebblebee Pages: 21

CU-08A TRACER unit

Brand: jablotron Pages: 4

Brand: CES Pages: 17

Dakota 20 - Hiking GPS Receiver

Brand: Garmin Pages: 6

Brand: Nextar Pages: 1

Brand: Giant Loop Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 86

Galaxy SmartTag

Brand: Samsung Pages: 611

Brand: G Sat Pages: 10

Brand: Blue Sky Network Pages: 6

Brand: MARLINK Pages: 4

Sky Connect Series

Brand: EMS Pages: 70

Brand: Loc8tor Pages: 6

Brand: Four-Faith Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands