© AUDIOTEL Engineering S.p.A.
67
C
EL
L
INE
®
AS-RS-AX-DX
USER MANUAL
1 Post - dialling call
GSM or PSTN subscribers can make calls by dialling the C
EL
L
INE
®
address GSM number
and, at the dialling tone, dial the desired PBX extension number.
2 Programmed call
GSM or PSTN subscribers dial the GSM number corresponding to C
EL
L
INE
®
. C
EL
L
INE
®
routes
the incoming call to either a pre-programmed extension or a pre-programmed external
subscriber, through PBX or central office line.
NOTE: it is possibile to use either post-dialling or programmed calls but not both.
WARNING: IN ORDER TO CLOSE A CALL, C
EL
L
INE
MUST RECOGNISE THE TIMING OF THE
CONGESTION TONE COMING FROM THE BRANCH EXCHANGE (TONE PERSISTENCY
GREATER THAN 6 SECONDS). THEREFORE, IT IS ADVISABLE TO CHECK THAT THE C
EL
L
INE
CONGESTION TONE PROGRAMMING CORRESPONDS TO THE ONE OF THE BRANCH
EXCHANGE.
4.3.2 C
EL
L
INE
®
is connected in residential configuration
If the telephone terminal is connected to C
EL
L
INE
®
by means of the LINE plug and C
EL
L
INE
®
is
connected by means of the T.E. to a central office line, calls can be routed over either the
PSTN or GSM network.
To originate a call over the GSM network it is necessary to define a code (see par. 5.1.10);
to originate the call over the PSTN network or another PBX extension it is necessary to
define a different code (see par. 5.1.11).
®
®
RS DX
GSM
network
PSTN
network
Central office line
• Originated voice call routed over the PSTN network or over the GSM network
Lift the handset and wait for the dialling tone, then type the code (see par. 5.1.10)
immediately followed by the desired subscriber’s number.
Between two different digits no more than 5 seconds are allowed (factory default timeout)
or exceed the timeout programmed (see par. 5.1.2). In case of exceeding the timeout,
C
EL
L
INE
®
will send the typed digits.
ENGLISH