Continuous Sealer
D 552 AVT
Troubleshooting
25
6 Troubleshooting
Troubleshooting may only be performed by authorised
maintenance personnel.
In the event of a malfunction, always remove the plug from the
socket before attempting to solve the problem.
If the problem cannot be solved using the troubleshooting table
below, please contact your dealer or Audion.
Problem
Cause
Solution
The sealer does not
respond in any way.
The main switch is set
to ’0’.
Switch on the sealer.
The plug is not, or not
properly, connected to
the socket.
Put the plug properly in
the socket.
The power supply is out
of order.
Check the power supply.
The emergency stop
button has been
pressed.
Reset the emergency
stop button.
Internal malfunction.
Contact your dealer or
Audion.
The seal is not neat.
The temperature has not
been set correctly.
Readjust the tempera-
ture.
The speed has not been
set correctly.
Readjust the speed.
The heating blocks and/
or the PTFE belts are
dirty.
Clean the heating blocks
and/or the PTFE belts.
The seal is not cooled
properly.
Switch on the cooling.
The heating block, the
cooling plate and/or the
press rollers are still in
the uppermost position.
Put the heating block,
the cooling plate and/or
the press rollers in the
lowermost position.
The PTFE belts are
worn.
Replace the PTFE belts.
